PREMIER L SHAPE + CHAISE

Classic Chesterfield Italia incorporates the following in their suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. Classic Chesterfield Italia  also attaches a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. Classic Chesterfield Italia uses five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: Classic Chesterfield Italia uses two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.

Frame

The wooden frame on this collection is composed of European Beechwood in all load bearing areas and Solid Pine in all non load bearing areas. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of Classic Chesterfield italia frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame,Classic Chesterfield Italia encases the entire structure. This process ensures the strength and integrity of the frame. Classic Chesterfield Italia puts one 1 1/2in of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.

Filling Materials

The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper on the surface for comfort. The density of these cushions will vary from 2.5 to 2.8. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in the industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.

Classic Chesterfield Italia also uses The Iconic POCKET SPRING seat cushion in the seat.

The pocket spring system is created by turning high tensile steel, individual springs, which are then wrapped in their own singular pocket of fabric. You will find that each individual seat cushion contains a matrix of individually wrapped coil springs encased in a specifically designed foam shell that is covered in Dacron fiber. The system has many benefits. The fabric pocket used allows each spring to slide up and down independently of it’s neighbors allowing for maximum comfort for more than one person on the sofa. The ultra high coil density allows maximum conformity to body contours. The POCKET SPRING system will allow each seat cushion to keep its uniformity over the life of the furniture. You will find the seat cushions to be tight which adds to the versatility of the frame.